Description of your first forum.
UpgradeDude72
Posts: 7 Joined: Sun Dec 21, 2025 8:16 pm
Post
by UpgradeDude72 » Sun Jan 11, 2026 9:02 pm
+1 Yeah, that's a common snag. One extra tip: after converting to GPT, double-check that CSM/Legacy Boot is disabled in your BIOS, as that can sometimes block the upgrade too.
mjW79FA0
Posts: 1 Joined: Sat Jan 03, 2026 6:35 am
Post
by mjW79FA0 » Sun Jan 11, 2026 9:53 pm
Yeah, I had the same problem. I had to actually disable and then re-enable Secure Boot in my BIOS before the checker finally recognized it.
vfLvwm
Posts: 1 Joined: Sun Jan 11, 2026 2:40 am
Post
by vfLvwm » Sun Jan 11, 2026 10:04 pm
This. Agreed, that toggle trick often works. Also, make sure you save and exit the BIOS properly—sometimes a quick restart isn't enough.
UpgradeDude72
Posts: 7 Joined: Sun Dec 21, 2025 8:16 pm
Post
by UpgradeDude72 » Mon Jan 12, 2026 1:23 am
You could also try clearing the TPM from your security settings in Windows, as that sometimes resolves the conflict.
YMf2tSYCAUpD
Posts: 1 Joined: Sun Jan 11, 2026 6:59 am
Post
by YMf2tSYCAUpD » Mon Jan 12, 2026 1:19 pm
Yeah, clearing the TPM is a good call. Also, double-check that your BIOS is set to UEFI mode and not Legacy/CSM, as that can trip up the check.
4054i
Posts: 3 Joined: Mon Jan 05, 2026 3:55 am
Post
by 4054i » Mon Jan 12, 2026 9:54 pm
+1 I had the same problem. For me, disabling the CSM support completely in the BIOS, not just enabling Secure Boot, finally got it to pass the check.
6cczu3r1
Posts: 4 Joined: Mon Jan 05, 2026 3:55 am
Post
by 6cczu3r1 » Tue Jan 13, 2026 1:21 am
Yeah, after disabling CSM did you also remember to save the changes and fully restart before running the check again?
iWOhvSYzpN
Posts: 2 Joined: Tue Jan 13, 2026 6:00 am
Post
by iWOhvSYzpN » Tue Jan 13, 2026 4:01 pm
Also, are you running the latest version of the PC Health Check app, as older versions sometimes gave false negatives? Good luck!
sXfhTdd
Posts: 2 Joined: Sat Jan 10, 2026 6:52 pm
Post
by sXfhTdd » Tue Jan 13, 2026 6:04 pm
Yeah, and sometimes a quick reboot after enabling it in the BIOS helps the setting fully register with Windows. Let me know if that works.