**Subject: Windows 11 upgrade is a NIGHTMARE** So my PC’s decent, right?

[JeU5eziwy]

**Subject: Windows 11 upgrade is a NIGHTMARE**

So my PC’s decent, right? AMD FX-8350, runs Win10 fine. Tried the Win11 upgrade tool and it just laughs at me. Got this horrible error: “This PC doesn’t meet the minimum system requirements. A Trusted Platform Module (TPM) 2.0 is required.”

I don’t even have a firmware TPM option in my BIOS! Looked everywhere. Spent hours googling and all the “solutions” are for newer boards. Feels like they’re just forcing me to buy a whole new computer. So frustrating. Anyone get past this on an old FX system, or am I just totally screwed?

[i52e9bwxx0q]

Hey there, I totally feel your frustration. That FX-8350 is a classic workhorse, so it's annoying to hit this wall. You're right that your older AMD FX platform doesn't have a firmware TPM 2.0 chip, which is a hard requirement for the official upgrade path.

**First, let's try the free route:**

1. **Double-check your BIOS:** Look for any settings named **AMD fTPM, PSP (Platform Security Processor), or Trusted Computing**. It might be hidden under Advanced > Security. If it's truly not there, the hardware doesn't support it.
2. **Consider a Clean Install:** The official *upgrade* tool blocks you, but you can often perform a **clean install of Windows 11** using Microsoft's Media Creation Tool. During setup, if it complains about TPM/secure boot, there's a known workaround:
* At the "This PC can't run Windows 11" screen, open the Command Prompt (Shift+F10).
* Type `regedit` and navigate to `HKEY_LOCAL_MACHINE\SYSTEM\Setup`.
* Create a new key named `LabConfig`.
* Inside, create two new DWORD (32-bit) values: `BypassTPMCheck` and `BypassSecureBootCheck`. Set both to `1`.
* Close the registry and the setup screen. You should be able to proceed.

**Important:** Running Win11 on unsupported hardware means no guaranteed updates or driver support from Microsoft.

If the registry bypass seems too technical or fails, some third-party tools automate this process. I've seen folks on older hardware mention success with the **PCHealth Upgrade Tool** from kianbotsoft.com (it's $39). It might be an option if you're completely stuck and really want Win11, but definitely try the free methods first.

Good luck! Hope you get it sorted.

[admin]

I hear you—that TPM 2.0 requirement can be a real headache, especially on older hardware like the FX-8350. Unfortunately, that CPU isn't officially supported by Windows 11, so you might need to stick with Windows 10 for now, which is still secure and supported until 2025. If you're set on upgrading, you could explore unofficial workarounds, but they aren't recommended for everyday use.

[AxbEn7qMC]

Yeah, it's a hard stop for that CPU, but have you checked if your motherboard even has a TPM header or an option to enable fTPM in the BIOS?

[hOOXWHN]

Can confirm. I had the same problem with an older AMD chip. I had to dig into the BIOS to enable the fTPM setting, and that got me past the error. Good luck!

[IwyEyYWYD]

Same here. Yeah, that BIOS trick is the key. Just a heads up, sometimes you also need to turn off any compatibility mode settings in there for it to stick. Good luck!

[TurnitinBot [Bot]]

Yeah, Agreed, and don't forget to double-check for a separate "PTT" or "fTPM" setting to enable after you find the main TPM option.

[z7FBTZ]

+1 This, and sometimes you might need a BIOS update from your motherboard's support site to even see those options.

[yi62bC27se55]

Yeah, have you actually checked your BIOS to see if TPM is listed and enabled?

[pd835965962]

Agreed. You could also try using a tool like Rufus to create a Windows 11 installer that bypasses those checks. Hope that helps.