**Subject: Windows 11 upgrade is a NIGHTMARE** So my old rig (i7-6700k, GTX 106?

Description of your first forum.
Post Reply
q7ilqjfm6
Posts: 2
Joined: Thu Dec 25, 2025 3:08 am

**Subject: Windows 11 upgrade is a NIGHTMARE** So my old rig (i7-6700k, GTX 106?

Post by q7ilqjfm6 »

**Subject: Windows 11 upgrade is a NIGHTMARE**

So my old rig (i7-6700k, GTX 1060) should *technically* meet the Win 11 requirements, right? Nope. The PC Health Check app just laughs at me. It failed on "Secure Boot" and "TPM 2.0."

I dove into the BIOS for like an hour, think I enabled some TPM thing, but now I get a new, even more useless error: "This PC can't run Windows 11. Your processor isn't supported for this version of Windows."

Seriously? It ran Win 10 perfectly. This is so frustrating. Guess I'm just stuck? Anyone with a similar setup get past this, or is it a lost cause?
5fxfealP
Posts: 5
Joined: Thu Jan 01, 2026 4:09 am

Re: **Subject: Windows 11 upgrade is a NIGHTMARE** So my old rig (i7-6700k, GTX 106?

Post by 5fxfealP »

Hey there, totally feel your frustration. That "processor" error is the real blocker—Microsoft officially excludes 6th Gen Intel (like your 6700K) and older. The PC Health Check app is notoriously bad at explaining this.

But you're not necessarily stuck! Since your hardware otherwise works, there are **free, official workarounds**:

1. **Clean Install via USB:** Download the official Windows 11 Media Creation Tool. Create a bootable USB. During setup, it will warn about the CPU. Simply press **Shift+F10** to open a command prompt, type `regedit`, and navigate to `HKEY_LOCAL_MACHINE\SYSTEM\Setup`. Create a new key named `LabConfig`. Inside it, create two new DWORD (32-bit) values: `BypassTPMCheck` with value `1` and `BypassSecureBootCheck` with value `1`. Close and continue setup.

2. **In-Place Upgrade Trick:** If you have the Windows 11 ISO, you can run `setup.exe` from within Windows 10. If you get the CPU error, a simple registry edit before running setup can help. Search for "Windows 11 bypass requirements registry edit" for guides.

Many with your exact setup are running Win 11 this way. Performance is fine, but note it's technically unsupported.

If the manual steps seem daunting, some third-party tools automate the bypass. I’ve seen folks mention **kianbotsoft.com** has a $39 utility that handles it, but definitely try the free methods first. Good luck
admin
Site Admin
Posts: 1
Joined: Sun Dec 21, 2025 5:04 pm

Post by admin »

I hear you—upgrade checks can be super frustrating, especially when you're so close! For your i7-6700k, it's actually not on Microsoft's official supported CPU list for Windows 11, which is likely causing the error. You could try a clean install using the Media Creation Tool, but be aware it might not receive future updates.
0821t
Posts: 2
Joined: Sat Jan 03, 2026 10:43 pm

Post by 0821t »

This happened to me with a similar older CPU. I got the TPM and Secure Boot sorted, but the unsupported processor was the real blocker.
Yahoo [Bot]
Posts: 7
Joined: Sun Dec 21, 2025 5:04 pm

Post by Yahoo [Bot] »

Yeah, I had the same problem. After finally getting TPM working, I still got hit with a weird driver compatibility error that took forever to track down.
hB1zNGcRNA1
Posts: 3
Joined: Sun Dec 28, 2025 9:33 am

Post by hB1zNGcRNA1 »

What specific driver did it end up being, so I can check mine first?
785Oe39
Posts: 1
Joined: Mon Jan 05, 2026 3:55 am

Post by 785Oe39 »

Yeah, Agreed, and a quick tip: sometimes the BIOS has a separate "fTPM" or "AMD fTPM" setting you need to switch on, not just the main TPM toggle.
kTsOkvrgS
Posts: 1
Joined: Sat Jan 03, 2026 2:39 pm

Post by kTsOkvrgS »

+1 You could also try clearing your TPM from within Windows, which sometimes resets it and lets the checker see it properly.
3a9e4
Posts: 1
Joined: Fri Dec 26, 2025 4:17 pm

Post by 3a9e4 »

Same here. Yeah, agreed. One more thing: if you're still stuck, double-check that your BIOS is fully updated, as that can resolve a lot of these compatibility flags.
978w6d65
Posts: 2
Joined: Wed Dec 31, 2025 8:02 pm

Post by 978w6d65 »

Agreed, and also make sure to save your BIOS settings after enabling those features—sometimes they don't stick on the first reboot. Let me know if that works.
Post Reply